home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SGI Developer Toolbox 6.1
/
SGI Developer Toolbox 6.1 - Disc 4.iso
/
public
/
fax
/
src
/
etc
/
config.att-dataport-2
< prev
next >
Wrap
Text File
|
1994-08-01
|
2KB
|
62 lines
# $Header: /usr/people/sam/fax/etc/RCS/config.att-dataport-2,v 1.4 1994/03/28 22:38:49 sam Rel $
#
# Configuration for using the Class 2 command interface with
# an AT&T DataPort 14.4 modem. Firmware version 166 (ati1)
# or newer.
#
# Hardware flow control is used.
#
# CONFIG: CLASS2: AT?T*Paradyne*
#
CountryCode: 1
LongDistancePrefix: 1
InternationalPrefix: 011
AreaCode: 415
DialStringRules: etc/dialrules
FAXNumber: +1.415.965.7824
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
#QualifyTSI: etc/tsi # accept facsimile from anyone
SpeakerVolume: off
RingsBeforeAnswer: 1
#
ModemType: Class2 # use this to supply a hint
ModemRate: 38400 # max rate for DCE-DTE communication
ModemFlowControl: rtscts
ModemFlowControlCmd: &R0\D1\Q3 # use RTS/CTS and enable RS232 handling
ModemSetupDTRCmd: &D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: &C1 # setup so DCD reflects carrier (or not)
ModemSetupAACmd: +FAA=1 # enable adaptive-answer in Class 2
#GettyArgs: "-h %l dx_%s" # modem supports auto-detect fax/data
#
ModemDialCmd: DT%s # T for tone dialing
#
ModemRecvFillOrder: MSB2LSB # bit order of received facsimile
ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit
#
# The modem returns "OK" when there is a timeout before carrier is
# established. This is treated as "NO CARRIER" by faxd. Thus we
# need to up the NoCarrierRetrys parameter to avoid having the server
# reject jobs prematurely.
#
NoCarrierRetrys: 3 # retry 3 times on no carrier
#
# Rev C01.66.10 firmware gives a bogus result string for
# +FDCC=? query so we override it here. Syntax is:
#
# (vr),(br),(wd),(ln),(df),(ec),(bf),(st)
# where,
# vr vertical resolution
# br bit rate
# wd page width
# ln page length
# df data compression
# ec error correction
# bf binary file transfer
# st scan time/line
#
Class2DCCQueryCmd: "!(0,1),(0-5),(0-4),(0-2),(0),(0),(0),(0-7)"